Manual | Buy One Now | Checkout Now Shipping! PALSTAR AT5Kplus 4500 Watt Antenna Tuner Price: $1495.00 Another Palstar Innovation Breakthrough! Palstar engineers decided to see what could be done to break away from the limitations of traditional antenna tuner design and provide the maximum possible flexibility to tune the widest range of antennas. The result is the revolutionary AT5Kplus. A front panel knob controls the microprocessor-driven mode controller that switches additional capacitance and inductance in and out of the circuit using 10kV rated vacuum relays. The variable input and output capacitors are 340pF @ 6kV, with additional 300pF @ 7.5kV fixed doorknob capacitors that can be switched to either or both the input and the output. This provides a maximum of 640pF each for the input and output, just the thing for the 160 meter operator. The 18µH, 10A @ 5kV roller inductor can have an additional 12µH fixed inductor switched in for a total of 30µH when needed. Selection of Coax 1, Coax 2, Balanced, and Bypass outputs is controlled by turning the front panel knob, and the status is displayed on the large, backlit, 2 line LCD readout. All of the switching is accomplished by 10kV rated vacuum relays that are mounted on a single PC Board that mounts directly on the backs of the variable capacitors and the roller inductor. This keeps all RF paths short for maximum efficiency. The AT5Kplus is truly the next generation in antenna tuners! NOTE: The AT5Kplus requires the use of an external SWR/Wattmeter. Covered by Palstar's One Year Warranty Order online: Order by phone:   1-800-773-7931 (USA Toll-Free)                              1-937-773-6255     (International) Order by fax/mail: Click here for order form Specifications 4500 Watts single tone, high efficiency, low tuner losses and wide Z range Frequency Coverage: 1.8 — 52 mHz Balanced output with high power 5 kW Teflon wire balun at the input of tuner circuit Custom, large plate variable capacitors (340 pF, 6kV Peak) + 300pF fixed (switchable) 18 µH roller inductor (10 ga. plated solid copper wire rated at 10 amps) and a 12µH fixed inductor (switchable). Microprocessor-driven mode controller selects L & C configuration and outputs Tuner status is displayed on large, backlit, 2 line LCD readout. Mode switching is done by 10kV rated vacuum relays Ferrite 1:1 input balun Chassis and top cover are 11 Ga. (.090") aluminium iridite coated and top cover is powder coat finished 12 VDC Wall transformer supplied (U.S. & Canada only) Dimensions: 16" wide x 9" high x 17 Weight: 30 lbs Images: AT5Kplus front view | AT5Kplus inside | AT5Kplus rear view | AT5Kplus Relay PCB Manual: AT5Kplus Manual [PDF]